Low carbon steel strip slitting machine

The slitting machine can divide the big width strip into Max.15 pcs of same small width strip that will be collected on the 800mm spools for flux cored welding wire production line.

It is expandable payoff that customer can load the raw strip coil on the pay-off body and make the mandrel expanded to tighten the strip coil on the pay-off.

There are hard alloy blade set for slitting the raw strip coil and driven by the motor, there is small spool mainly used for collecting the edge of strip.

We design the pan for collecting the slit strip with 15 grooves. There are holes on the pan so that customer could check the slit strip quantity easily. The pan can be take-up to collect the slit strip and also can be pay-off for rewinding the slit strip on 800mm spools.

The slit strip in each groove of the pan will be rewound on the spools one by one. The 800mm spool take-up will be also pay-off for flux cored welding wire production line.

product details

Main scope of supply

Steel strip pay-off: There is mandrel can be smaller at the beginning to easily make the strip coil mounted on the mandrel. Then the mandrel will be expanded to make coil fixed on the mandrel tightly.
Slitting unit: There are hard alloy material plates fixed on both sides of slitting unit. The distance between two plates should be depended on the strip width.
Inverted vertical type drum packaging machine
Slit strip collection pan: For collecting the Max. 15pcs of slit strip on the pan.
Strip winding machine: The winding machine is driven by the 15KW motor and normally working speed is 60m/min.
After strip slitting, the strip winding machine can be pay-off and have strip rewinding on 800mm spool take-up.

Main machine specifications

Inlet raw strip thickness: 0.1mm-1.2mm
Max. Slitting strip number: Max. 15 pcs
Slitting accuracy: ±0.05mm of the width
Line working speed: Around 1m/s
Air supply pressure: Min. 0.4Mpa
Slitting unit motor power: 5.5KW
800mm spool take-up motor power: 15KW